Online Configurator
Belt Conveyor
10 steps to the offer
Step 1 of 10
Enter the base dimension
Frame width [from 40 mm to 1.250 mm]
Belt length [from 500 mm to 12.000 mm]
Height side guides [from 10 mm to 50 mm]
Slope angle [from -10° mm to +10° mm]
Step 2 of 10
Select the deflection type
No Nose Bar
Nose Bar on outlet side
Viewing direction = running direction of belt
Nose Bar on the inlet side
Viewing direction = running direction of belt
Nose Bar on both sides
There are validation errors in some fields, please check the error messages
A Nose Bar deflection is suitable for the transfer of small or tall objects between two conveyor belts
Step 3 of 10
Select additional parameters
Belt Selection
Belt 1 (NHM-8EKBV) - for general transports, stowable and non-adhesive. Surface: super matt finish, black
Belt 2 (NAB-7EEDV) - for easily sloped transports, not stowable and adhesive. Surface: smooth, dark green
Belt 3 (NSL-10ELBV) - for heavily sloped transports, not stowable and highly adhesive. Surface: Longitudinal groove structure, black
Belt 4 (FNI-5EIWH) – food-grade, for general transports, stowable and non-adhesive. Surface: Impregnated fabric, white
Belt 5 (F-5EXWT) – food-grade, for easily sloped transports, not stowable and medium adhesive. Surface: matt, white, more oil-resistant
Belt 6 (H-6EHDT) - for easily sloped transports, not stowable and medium adhesive. Surface: smooth, dark green
Belt Speed [from 3 m/min to 65 m/min]
Payload [max. kg]
There are validation errors in some fields, please check the error messages
Optional
Interval mode
Acceleration [m/s2]
Acceleration time [s]
Stowage mode
Friction factor µ
Stowed mass [kg]
Interval mode - the loaded conveyor belt is stopped and restarted several times per hour.
Stowage mode - the conveyed goods are stopped and jammed up on the running conveyor belt. The conveyor belt is permanently moving underneath the conveyed goods
Step 4 of 10
Select Drive Type
Direct Drive
lateral at the front end of the belt
Indirect Drive
below at the front end of the belt
Center drive position
below and in the middle of the belt
Drum Drive
built in the drum
Position deviates from middle [mm]
inlet side
outlet side
There are validation errors in some fields, please check the error messages
Step 5 of 10
Select the Motor Position
Running direction of the conveyor belt = direction of view
Right
Illustration exemplary Center Drive
Left
Illustration exemplary Center Drive
Step 6 of 10
Select the Motor Alignment
0 Degree
90 Degree
180 Degree
270 Degree
Step 7 of 10
Select the Junction Box position
[Illustration exemplary Center Drive]
0 Degree
90 Degree
180 Degree
270 Degree
Thermal Contact
Thermal Sensor
External Fan
There are validation errors in some fields, please check the error messages
Thermal Contact – Bimetal, reporting the respective operating temperature (above/below standard temperature) to the control unit
Thermal Sensor – Thermistor, installed in the motor, reporting a resistance value (proportional to the temperature) to the control unit
External Fan – ventilation, operating separately from the motor (speed-independent) for constant motor cooling. Recommended when the motor is controlled by a frequency converter or if the belt conveyor is operated in Interval mode
Step 8 of 10
Select the Frame (1)
with Frame
Height up to top of belt [from 400 mm to 2.000 mm]
Due to the dimensions entered, a frame with a wider base is recommended for stability reasons (see illustration)
Step 9 of 10
Select the Frame (2)
Leveling Feet
(height adjustable)
Swivel Castors
with brake function
with Height Adjustment
+/- 100mm
Clamping tab for floor fixation
The option ‘Height Adjustment’ can be selected when using Leveling Feet or Swivel Castors
Step 10 of 10
Your Belt Conveyor
Thank you very much for your interest in our Belt Conveyor solutions
Receive a quotation
Order
Further questions and special solutions
You are welcome to contact us directly
+43 (0) 5522 73011
foerdertechnik@alvaris.eu
Due to the selected parameters, no price could be determined online. Please contact our specialists.
Your selection in the summary
Your base data
Width:
Length:
Height side guides:
Slope angle:
Payload:
Interval mode:
Acceleration:
Acceleration time:
Stowage mode:
Friction value:
Stowed mass:
Our recommendation
Belt Conveyor
Your selection details
Nose bar:
Belt Selection:
Belt Speed:
Drive type:
Center drive position:
Motor position:
Motor alignment:
Junction box position:
Thermal Contact:
Thermal Sensor:
External Fan:
Frame:
Height up to top of belt:
Floor element:
Clamping tab for floor fixation:
Height Adjustment:
Indicative price
EUR
(net, ex works)
Contact Details
Please enter your data in order for us to contact you
I agree with the privacy policy
Please inform me by Email about news
Thank you for contacting us
We will contact you shortly
Your ALVÁRIS TEAM